Commercial Industrial High Quality Fully Automatic Plastic Cap Injection Stretch Mould Blowing Machine
Features:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container
| |
| TECHNICAL PARAMETER TABLE |
|
| INJECTION UNIT |
SCREW DIAMETER |
mm |
50 |
| SCREW L/D RATIO |
L/D |
25 |
| INJECTION CAPACITY (THEORETICAL) |
cm3 |
441 |
| INJECTION WEIGHT(PS) |
g |
463 |
| INJECTION PRESSURE |
MPa |
143 |
| INJECTION RATE |
g/s |
179 |
| PLASTICIZING CAPACITY |
g/s |
25 |
| SCREW SPEED |
rpm |
160 |
| CLAMPING UNIT |
CLAMP FORCE |
KN |
1880 |
| OPEN STROKE |
mm |
450 |
| MAX. MOULD HEIGHT |
mm |
530 |
| MIN. MOULD HEIGHT |
mm |
180 |
| SPACE BWTWEEN TIE-BARS (W×H) |
mm |
510*460 |
| EJECTOR FORCE |
KN |
53 |
| EJECTOR STROKE |
mm |
130 |
| EJECTOR NUMBER |
n |
5 |
| OTHERS |
PUMP PRESSURE |
MPa |
16 |
| MOTOR POWER |
KW |
18.5 |
| HEATING POWER |
KW |
14.55 |
| MACHINE DIMENSION (L×W×H) |
m |
5.69*1.38*2.08 |
| MACHINE WEIGHT |
t |
5.3 |
Service Term
1. Installation
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
2. Translator
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.
Commercial Terms
1. Warranty
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
2. Payment
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight
Audited Supplier 
){kind=link}
){kind=link}