Full-Automatic Electric Pet Bottle Blow Moulding MachineDESCRIPTION :
BY series is the fastest liner blow molding machine in mainland of China by now. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
It is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. BY series consists of three main parts: preform loading system, Heater channel & blow station.MACHINE FEATURES:
1. Machine use of advanced PLC control system , stable in performance, automatic preform feeding .
2. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater
3. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
4. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
5. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. Technical parameter
Service Term1. InstallationThe initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled. While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below. When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals. 2. TranslatorIf translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.Commercial Terms1. WarrantyAll parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company. 2. Payment30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.We also accept L/C payment, 30% down payment, and 70% L/C at sight Connection: Phone:+86 18921971286Tel: +86-512-55398012Fax: +86-512-55398012Address: XiGang jinfeng town,Zhangjiagang city, jiangsu province
|Bottle type specification||Cavity||2|
|Bottle mouth maximum overall diameter||80mm|
|Bottle biggest diameter||100mm|
|Bottle maximum height||330mm|
|Power specifications||Light tube quantity||32pcs|
|Light tube power||0.75KW|
|Maximum heating power||24KW|
|All electric machine installation||27KW|
|Air pressure specification||Work pressure||7-9kg/cm2|
|Low-pressure gas consumption||1000L/min|
|Blow bottle pressure||25-35kg/cm2|
|Higher -pressure gas consumption||1500Ltr/min|
|Frozen water specification||Work pressure||5-6 kg/cm2|
|Frozen water flow||30L/min|
|Machine specification||Size of the machine||2.25x1.6x1.7|
|Weight of the machine||2.5ton|