High Technology Pure Water and Mineral Water Liquid Filling Carbonated Machine Equipment High Technological Machine
1. This equipment is used in production of bottled non-carbonated drink of fruit juice, fruit wine, mineral water and pure water.
2. The magnetic torque is used for screw capping.
3. The filling and capping will be stopped automatically when there is no bottle.
4. Spring cramps are used in the bottle rinsing process.
5. The empty bottles can be turned over 180° Along the conveying rail. Rinsing the bottles inside and outside. The efficiency of bottle rinsing is high.
6. The whole machine is controlled by PLC with touch-screen as the human-machine interface.
7. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.
8. The liquid filling technology of gravity which learned from latest technology from Japan and Germany is used in the design.
| Model |
| CGF16/12/6 |
CGF18/18/6 |
CGF24/24/8 |
CGF32/32/12 |
CGF40/40/12 |
CGF48/48/12 |
| Production capacity:500ml (B/h) |
4000 |
6000 |
10000 |
14000 |
17000 |
20000 |
| Suitable bottle standard(mm) |
150-300 |
150-340 |
150-340 |
150-340 |
150-340 |
150-340 |
| Suitable cap standard(mm) |
φ50-φ110 |
| Filling pressure(Mpa) |
0.2-0.3 |
| Installed power |
3.13 |
3.84 |
3.84 |
5.6 |
6.3 |
7.3 |
| Filling temperature |
Room temperature |
Room temperature |
Room temperature |
Room temperature |
Room temperature |
Room temperature |
Overall size:
L*W*H(mm) |
2400*1760*2350 |
2470*1970*2350 |
2865*2170*2350 |
3700*2570*2350 |
3800*2950*2400 |
4500*3400*2400 |
| Total weight(kg) |
2500 |
3000 |
4000 |
5000 |
6000 |
7000 |
Service Term
1. Installation
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
2. Translator
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.
Commercial Terms
1. Warranty
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
2. Payment
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight
Audited Supplier 
){kind=link}
){kind=link}